Syscom DS8116HCIST Manual de usuario descargar pdf (Pagina 35)

Configuring Record Settings

There are multiple ways to set up your DVR for recording, including setting up a recording schedule, triggering a

recording by motion detection and/or a sensor alarm, and manually starting the recording. In addition, DS-8100 AH (F)

(L) I-ST also supports the command triggered recording.

#6B0/6&@630/1&+6..4-<8& &

Before configuration, please make sure your DVR has been installed with HDD and has completed its initialization,

otherwise, access Menu > HDD Management to install the HDD and perform initialization first.

Note: Please refer to Initializing HDD for specific instructions for initializing HDD.

,-4.47:4J4-<&@630/1&+6..4-<8& &

1. Click Menu > Settings > Record to access the Record Settings dialog box, shown in Figure 1.

Figure 1. General Record Settings

2. Select the camera you want to configure.

3. Configure the following settings:

• Encoding Parameters: Set the encoding parameters to be Normal or Event.

• Stream Type: Set the stream type to be Video or Video & Audio.

• Resolution: Set recording resolution.

• Bit Rate Type: Set the bit rate type to be Variable or Constant.

• Video Quality: Set the video quality of recording, with 6 levels configurable.

• Frame Rate: Set the frame rate of recording.

• Max Bit Rate: Select or customize the maximum bit rate for recording.

4. Click the Set button under More Settings to configure more recording settings, as shown in Figure 2.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 120 121

Sin comentarios

Syscom DS8116HCIST Manual de usuario Pagina 35